Development of the CMS detector for the CERN LHC Run 3

The CMS collaboration; A. Hayrapetyan; A. Tumasyan; W. Adam; Laurent Forthomme; H. Kirschenmann; K. Österberg; M. Voutilainen; Shudhashil Bharthuar; Erik Brücken; F. Garcia; J. Havukainen; Jaana Heikkilä; Kimmo Kallonen; Minsuk Kim; R. Kinnunen; Pirkitta Koponen; Matti Kortelainen; T. Lampén; K. Lassila-Perini; S. Laurila; S. Lehti; T. Lindén; Mikko Lotti; P. Luukka; Laura Martikainen; Mikael Erkki Johannes Myllymäki; Juska Pekkanen; Milla-Maarit Rantanen; H. Siikonen; E. Tuominen; J. Tuominiemi; Raimo Turpeinen; Jussi Viinikainen; H. Petrow; T. Tuuva

doi:10.1088/1748-0221/19/05/P05064

Development of the CMS detector for the CERN LHC Run 3

The CMS collaboration, A. Hayrapetyan, A. Tumasyan, W. Adam, Laurent Forthomme, H. Kirschenmann, K. Österberg, M. Voutilainen, Shudhashil Bharthuar, Erik Brücken, F. Garcia, J. Havukainen, Jaana Heikkilä, Kimmo Kallonen, Minsuk Kim, R. Kinnunen, Pirkitta Koponen, Matti Kortelainen, T. Lampén, K. Lassila-PeriniS. Laurila, S. Lehti, T. Lindén, Mikko Lotti, P. Luukka, Laura Martikainen, Mikael Erkki Johannes Myllymäki, Juska Pekkanen, Milla-Maarit Rantanen, H. Siikonen, E. Tuominen, J. Tuominiemi, Raimo Turpeinen, Jussi Viinikainen, H. Petrow, T. Tuuva

Tutkimustuotos: Artikkelijulkaisu › Artikkeli › Tieteellinen › vertaisarvioitu

Abstrakti

Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger.

Alkuperäiskieli	englanti
Artikkeli	P05064
Lehti	Journal of Instrumentation
Vuosikerta	19
Numero	5
Sivumäärä	256
ISSN	1748-0221
DOI - pysyväislinkit	https://doi.org/10.1088/1748-0221/19/05/P05064
Tila	Julkaistu - 23 toukok. 2024
OKM-julkaisutyyppi	A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä, vertaisarvioitu

Tieteenalat

114 Fysiikka

Pääsy asiakirjaan

10.1088/1748-0221/19/05/P05064Lisenssi: CC BY

Hayrapetyan_2024_J._Inst._19_P05064Lopullinen julkaistu versio, 58,2 MBLisenssi: CC BY

Siteeraa tätä

The CMS collaboration, Hayrapetyan, A., Tumasyan, A., Adam, W., Forthomme, L., Kirschenmann, H., Österberg, K., Voutilainen, M., Bharthuar, S., Brücken, E., Garcia, F., Havukainen, J., Heikkilä, J., Kallonen, K., Kim, M., Kinnunen, R., Koponen, P., Kortelainen, M., Lampén, T., ... Tuuva, T. (2024). Development of the CMS detector for the CERN LHC Run 3. Journal of Instrumentation, 19(5), Artikkeli P05064. https://doi.org/10.1088/1748-0221/19/05/P05064

@article{cf59520af8f44c40add81a4be4c060ac,

title = "Development of the CMS detector for the CERN LHC Run 3",

abstract = "Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger.",

keywords = "114 Physical sciences",

author = "{The CMS Collaboration} and A. Hayrapetyan and A. Tumasyan and W. Adam and Laurent Forthomme and H. Kirschenmann and K. {\"O}sterberg and M. Voutilainen and Shudhashil Bharthuar and Erik Br{\"u}cken and F. Garcia and J. Havukainen and Jaana Heikkil{\"a} and Kimmo Kallonen and Minsuk Kim and R. Kinnunen and Pirkitta Koponen and Matti Kortelainen and T. Lamp{\'e}n and K. Lassila-Perini and S. Laurila and S. Lehti and T. Lind{\'e}n and Mikko Lotti and P. Luukka and Laura Martikainen and Myllym{\"a}ki, {Mikael Erkki Johannes} and Juska Pekkanen and Milla-Maarit Rantanen and H. Siikonen and E. Tuominen and J. Tuominiemi and Raimo Turpeinen and Jussi Viinikainen and H. Petrow and T. Tuuva",

year = "2024",

month = may,

day = "23",

doi = "10.1088/1748-0221/19/05/P05064",

language = "English",

volume = "19",

journal = "Journal of Instrumentation",

issn = "1748-0221",

publisher = "Institute of physics",

number = "5",

}

The CMS collaboration, Hayrapetyan, A, Tumasyan, A, Adam, W, Forthomme, L, Kirschenmann, H , Österberg, K , Voutilainen, M, Bharthuar, S, Brücken, E , Garcia, F, Havukainen, J, Heikkilä, J, Kallonen, K, Kim, M, Kinnunen, R, Koponen, P, Kortelainen, M, Lampén, T , Lassila-Perini, K , Laurila, S , Lehti, S , Lindén, T, Lotti, M, Luukka, P, Martikainen, L, Myllymäki, MEJ , Pekkanen, J , Rantanen, M-M, Siikonen, H, Tuominen, E , Tuominiemi, J , Turpeinen, R, Viinikainen, J, Petrow, H & Tuuva, T 2024, 'Development of the CMS detector for the CERN LHC Run 3', Journal of Instrumentation, Vuosikerta 19, Nro 5, P05064. https://doi.org/10.1088/1748-0221/19/05/P05064

TY - JOUR

T1 - Development of the CMS detector for the CERN LHC Run 3

AU - The CMS Collaboration

AU - Hayrapetyan, A.

AU - Tumasyan, A.

AU - Adam, W.

AU - Forthomme, Laurent

AU - Kirschenmann, H.

AU - Österberg, K.

AU - Voutilainen, M.

AU - Bharthuar, Shudhashil

AU - Brücken, Erik

AU - Garcia, F.

AU - Havukainen, J.

AU - Heikkilä, Jaana

AU - Kallonen, Kimmo

AU - Kim, Minsuk

AU - Kinnunen, R.

AU - Koponen, Pirkitta

AU - Kortelainen, Matti

AU - Lampén, T.

AU - Lassila-Perini, K.

AU - Laurila, S.

AU - Lehti, S.

AU - Lindén, T.

AU - Lotti, Mikko

AU - Luukka, P.

AU - Martikainen, Laura

AU - Myllymäki, Mikael Erkki Johannes

AU - Pekkanen, Juska

AU - Rantanen, Milla-Maarit

AU - Siikonen, H.

AU - Tuominen, E.

AU - Tuominiemi, J.

AU - Turpeinen, Raimo

AU - Viinikainen, Jussi

AU - Petrow, H.

AU - Tuuva, T.

PY - 2024/5/23

Y1 - 2024/5/23

N2 - Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger.

AB - Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger.

KW - 114 Physical sciences

U2 - 10.1088/1748-0221/19/05/P05064

DO - 10.1088/1748-0221/19/05/P05064

M3 - Article

SN - 1748-0221

VL - 19

JO - Journal of Instrumentation

JF - Journal of Instrumentation

IS - 5

M1 - P05064

ER -