Utilization of profilometry, SEM, AFM and contact angle measurements in describing surfaces of plastic floor coverings and explaining their cleanability

Risto Kuisma, Eija Pesonen-Leinonen, Irma Redsven, Hanna-Riitta Kymäläinen, Inka Saarikoski, Anna-Maija Sjöberg, Mikko Hautala, Eija Pesone-Leinonen

    Forskningsoutput: TidskriftsbidragArtikelVetenskapligPeer review

    Sammanfattning

    The tendency to soil and cleanability of ten commercial plastic floor coverings: eight vinyl (PVC) floor coverings, one vinyl composite tile and one plastic composite tile, were examined. Floor coverings were soiled with inorganic, organic and biological soil. The cleanability was measured both by bioluminescence of ATP (adenosine triphosphate) and colorimetrically. The surface topography was studied by AFM, SEM and with a profilometer. From the 2D- and 3D-profilometric measurements several characteristic parameters of the surface profiles were extracted. The tendency to soil and cleanability were compared with the characteristics of the surface. A weak correlation was found between roughness and soilability but no correlation between roughness and cleanability. Roughness had no correlation with contact angle. (c) 2005 Elsevier B.V. All rights reserved.
    Originalspråkengelska
    TidskriftSurface Science
    Volym584
    Utgåva1
    Sidor (från-till)119-125
    Antal sidor7
    ISSN0039-6028
    DOI
    StatusPublicerad - 2005
    MoE-publikationstypA1 Tidskriftsartikel-refererad

    Vetenskapsgrenar

    • 222 Övrig teknik och teknologi

    Citera det här